Inventory

Brewer Golden Eagle single head resaw, electric drive, 36" dia wheels, return belt, includes nume...

6 strand deck, H-78 rooftop chains, electric drive, 14' wide x 27' long, very good condition Make: Unknown

Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NE...

Corley 3 head-block circle mill, DY turbo- turners, Accura-Set set-works, air over air, almost hy...

Helle 3 head block, 36" carriage with 124" knees, husk with top saw, 60' long track, frame, 60 hp...

Meadows edger 4" thick x 36" wide capacity, infeed/ outfeed, 1 movable-1 stationary blade, includ...

Brewer 2 head resaw with complete run-around system, electric/ hyd drive, good working condition Make: Brewer

Lots of vibrating conveyors in stock, up to 36" wide pans, hyd drives, electric drives, call with...

Lots of hyd units in stock, vane type pumps, pressure comp pumps, various sizes from 5hp -50-hp, ...

roll case 30" wide x 16' long, rolls have spirals, electric drive, good condition Make: Unknown | Stock numb...

4 strand green chain, 7' 6" wide x 18' long, C-55 rooftop chain, includes BRAND NEW DRIVE SHAFT/ ...

Newman KM-16 6 head trim saw, hyd drive on heads, includes 2 conveyors-1 for material and 1 for w...

4 strand transfer deck, #80 roller chain, electric drive, good working condition Make: Unknown | Stock numbe...

sections of dead rollers, 10' long, 15"-21" wide, up to 24 section available, excellent condition...

4 strand transfer deck, 10' wide x 27' long, PRICE INCLUDES BRAND NEW 81X CHAIN, good condition Make: Unknown

30" Cambio 5 arm ring debarker, electric drive, includes infeed/ outfeed log troughs and all cont...

Hyd drive for sawmill carriage, good working condition Make: Unknown | Stock number: 18242 | Updated at: 202...

The Cornell blower is in mint condition. The chip blower with dual loading pipe is in fair condit...

Powered with a 8.3 liter Cummins. It is a working unit, but it does have some soft spots that are...

1946 hrs., tracks, hi-flo, 2 speed, 3200# lifting capacity, AC/Heat, enclosed cab, under full war...

42 hp, Deutz engine, trencher with backhoe, back fill blade, 72" snowblower, mini skid plate atta...

72" capacity, 3 ph., 480v, with the unscrambler. Make: Morgan | Stock number: 14603 | Updated at: 2025-01-30...

5 strand green chain, 11' wide x 21' long, electric gear-box drive, C-55 rooftop chain, drive sha...

Froedge 6' lumber stacker, built for stacking green lumber, includes all transfer decks needed an...

This 48" Morbark Chip Pac is a stationary wood chipper designed for efficient sawmill operations....

The Mellott Model #6 Log Turner, designed for sawmill operations, stands out due to its efficient...

40" blower with a 21 hp. electric motor in very good good condition. Make: Morbark | Stock number: 10602

Heavy duty, all hyd., 4 strand, 10' x 26' long, hyd. controls included. 7 years old and in very g...

100 hp., 460v, 3 ph., 124 amp, with a 6 groove, 20" pulley. In working condition. Stock number: 12612 | Upda...

The 60 Series Detroit Genset is a reliable and powerful power unit ideal for various industrial a...

250 KW, standby model, 376 amps, 3 ph., 390 hp, 9184 hrs. A clean, good, solid machine just out o...

4 strand transfer deck, 10' 5" wide x 35' long, electric gear-box drive, 81X chain, good working ...

Linden step-feeder for logs, 16' long capacity, 15 hp electric powered hy unit, good working cond...

4 strand transfer deck, 10' wide x 11' long, 5 hp electric gear-box S style drive, 81X chain, hea...

3 strand transfer deck, 10' wide x 18' long, 5 hp electric gear-box drive, 81X chain, good workin...

2019, wide head, low hours, computerized setworks, a complete hydraulic mill with a good diesel e...

1 stationary blade, 6"x 26" capacity, 8' in & 8' out rollers, 2 power rollers in & out, split bla...

Hanchett chipper knife sharpener, electric drive, good working condition Make: Unknown | Stock number: 15091

belt conveyor 11" wide x 37' long, approx. 4" tall sides, no power, excellent condition Make: Unknown | Stoc...

Gang edger, husk, track & carriage, log turner, log deck, rollers, power unit is V10 Cat diesel w...

Approx. 3000 hrs., 200 plus hp., in good running condition. Make: Detroit | Stock number: 12609 | Hours: 3000

Line shaft ready with a return belt. 2 small hydraulic units installed plus a sizer inline. Good ...

pallet dismantler, electric drive, good working condition Make: Unknown | Stock number: 14083 | Updated at: ...

BRAND NEW BAKER!! Includes return belt. All electric. Make: Baker | Stock number: 3607 | Updated at: 2025-01...

Whirlwind up-cut chop saw, electric drive, air power for blade movement, good working condition Make: Whirlwind

Cutting capacity is 3.5" high x 6.5" wide, 230v, 3 ph., 18" blade. In running condition and would...

12" x 12", belt return, good condition, line shaft ready. Jacob Zook: 115475 GREY ROAD 3, CHESLEY...

Unit has less than 20 hours. Has not been run in several years. Has slight shipping damage on the...

Morgan single head resaw with return belt, electric drive, very good condition and ready to work....

Cab with AC and heat, serviced @ 2500 hrs., new turbo @ 2000 hrs., new tracks, runs and drives ve...

Continental hyd power unit, 5 hp electric drive, pressure comp pump, approx 10 gal reservoir, goo...

A clean machine in excellent condition. AC/Heat in the cab. The loader was not in rough operation. Make: Case

roll case 24" wide x 25' long, hyd drive, good working condition Make: Unknown | Stock number: 9261 | Update...

Right hand, 3 headblock, setworks, tracks, cab, and drive. Complete mill was in operation until t...

22" blade, no power on the blade, 8' infeed and 6' outfeed, powered rollers, powered kick back. A...

15 hp., 3 ph. electric motor. Good condition. Make: Morgan | Stock number: 3602 | Updated at: 2025-01-14 18:...

Some wear on this machine. In operation until the end of 2024 and still in good condition. Make: Morbark

Very good, clean machine, in excellent running condition. Side shift and forks included. Make: Hyster | Stoc...

A clean machine in good running condition. Has side shift, but no forks. Make: Clark | Stock number: 13615

This double end trim saw was rebuilt by Showcase Equipment. Computerized setworks. Was in product...

dust auger 12' long- 4" dia auger, electric/ gearbox drive, good condition Make: Unknown | Stock number: 10371

Shop built chop saw, downward cut, air operated with a foot pedal, 5' infeed dead rolls with stop...

Portable, steel wheels, new 35 hp Vanguard motor, 12v over hyd., fully automated, has hyd. pressu...

transfer/ log deck, 3 strands, 8' wide x 20' long, H-78 chains, working condition Make: Unknown | Stock numb...

roll case, 24" wide x 25' long, 6" dia rolls, good working condition Make: Unknown | Stock number: 9259

Helle 2 blade vertical edger, 22" dia blade, 40 hp electric drive, price includes going through s...

55 hp. Yanmar engine and has the new brand of setworks - Wood-Mizer did a complete check on this ...

barn sweep, total 80' long-all flat, electric drive, working condition Make: Unknown | Stock number: 10370

Webster vibrating conveyor, 24" wide pan 9" tall sides, 80' long, electric drive, very good condi...

5 strand heavy duty deck, 12' 6" wide x 25' long, electric drive, H-78 chain, very good condition Make: Unknown

40 hp electric drive hyd unit, pressure comp pump, includes cooling radiator and accumulator, ver...

heavy duty transfer deck, 5 strands, 14' wide x 12' long ,electric drive, H-78 chains, very good ...

roll case, 30" wide x 35' long, 8" dia rolls, electric drive, includes 4 strand pop-up transfer t...

bar type log turner, used with 42" carriage, hyd drive, good working condition Make: Salem | Stock number: 8062

Never been used. Douglas Manufacturing, Part #HMG 30. MFG date 1221. 23"w 31" long 8.5" H Call 23...

3 ph. 480v electrical powered, 30" band wheels, air strain, return belt. This is a reconditioned ...

Patz style chain barn sweep, hyd drive, 6' flat section, 50' incline section, paddles are 17" lon...

Has extension for cutting timber up to 52' long. 125 hp 4045 John Deere engine with 4300 hours. S...

Reckart cant catcher for drop use with a drop belt, air powered, 4 arms, travel is 30", good work...

Reckart drop belt, 24" wide x 13' long, air cylinder for up-down, hyd drive, good working condition Make: Re...

roll case/ transfer deck, rolls are 30" wide x 18' 6" long, has side-transfer chains, working con...

Manually operated cutting bar, 20" x 24' in length capacity. 16 hp. on the saw and a 16 hp. on th...

2.5" capacity, 1.5 hp., single phase. Intended to chop metal and plastic banding or band saw blad...

Under 200 hrs., ripper mounted on the rear, 6 way 9' blade, 20" tracks. This machine is like new! Make: Unknown

3 cylinder, speed clutch, radiator & controls are from a refer unit. It runs like new and is in e...

Brand New! Electric. Schwartz Sawmill: 10457 US Hwy. 50, Hillsboro, OH, 45133 Make: AMP | Stock number: 20608

Brand new welder, generator, plasma cutter, air compressor, with a remote start. Schwartz Sawmill...

Brand New! Kohler Generator with a remote start. Schwartz Sawmill: 10457 US Hwy. 50, Hillsboro, O...

Smicksburg vertical band head-rig, line-shaft ready, includes skid of spare parts and is ready fo...

New front tires with foam, new front brakes, rear tires at 40% with foam. John Deere 4045 Powerte...

Shop built gang-reclaim slab saw, 2 small conveyor belts included. In like new condition. Schwart...

Pro-Cut BRAND NEW! single head resaw with return, lineshaft ready, option available for electric ...

HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, op...

Morbark 58" dia 3 knife chipper, good working condition, includes 2 sets of knives Make: Morbark | Stock num...

Brewco single head resaw, line-shaft ready, working condition Make: Brewco | Stock number: 3091 | Updated at...

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-...

Webster vibrating conveyor, 18" wide pan x 20' long, electric drive, good working condition Make: Webster

50 hp on the head and a 15 hp on the hyd. electric motors. 36" x 16' log capacity. Includes air c...

Pendu chop-saw system, electric drive, price includes infeed/outfeed rollers, good working condition Make: P...

30" wheels, top guide is hand crank, 32" opening, has weight strain and is in working condition. Make: Unknown

Be careful and work safely! Call for more info and pricing. Stock number: 20604 | Updated at: 2025-03-03 19:...

Custom sizes available, build to your specs Stock number: 20605 | Updated at: 2025-01-20 13:07:43 UTC

113kw, 3 phase, 480v. The engine is a year 2000 and is a complete rebuilt with no hours after the...

Precision vibrating conveyor, 18" wide pan x 55' long, 8" sides, electric drive, good working con...

4 strand transfer deck, 10' 6" x 10' long, H-78 rooftop chain, electric gearbox drive, has board ...

1/4"x 8' Wide, I s powered with a electric motor. The machine is in great condition. Call for mor...

chain type log turner, 36" chain, hyd drive, good working condition Make: Mellott | Stock number: 8059

chain type log turner, sized for 40" carriage, hyd drive, good working condition Make: HMC | Stock number: 8060

slab drag conveyor, 15' x 14', electric gearbox drive,81X chain with steel cleats bolted on, good...

slab drag, 15' x 15', electric gearbox drive, 81X chain with steel cleats bolted on, good working...

concave belt conveyor, 36" wide x 30' long, electric gear box drive, good working condition Make: Unknown

saw sharpener for circle blades, up to 36" dia blades, electric drive, working condition Make: Unknown

Cornell edger, 36" wide x 6" thick capacity, 40 hp electric motor powered, includes infeed roller...

Brewer pallet board chamfer, rebuilt by Brewer and not used much since, electric & hyd drive, ver...

13000 lb. lifting capacity, 15' extension, air tires are like new (not pictured). Well maintained...

Baker single head resaw, 12" wide capacity, 25hp electric drive on head, includes 2 end-around ta...

circle saw husk, fits 56" dia blade, includes off-bearing belt, good working condition Make: Unknown | Stock...

rollcase, pop-up rollers, perfect for putting in a transfer deck, 16" wide x 7' long, foot pedal ...

Tyrone-Berry carriage drive, includes valve for sawyer, good working condition Make: Tyrone-Berry | Stock nu...

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition Make: Baker | Stock ...

Portable, 3 head block, right hand, air dogs and flippers, hyd. setworks and drive. This heavy du...

splitter saw, designed to split cants, boards, etc., 50hp electric drive, 81x chain, 40" dia inse...

4 head trim saw, up to 12' long capacity, electric powered, includes material and waste belts, pr...

Mellott rosser-head debarker, your choice of power (electric or hyd), new babbit in bearings, new...

Keystone double head notcher, electric drive on heads, hyd's for pusher arm, good working condition Make: Ke...

5" x 20" capacity, belt feed, 24" blower, 2 years old, with a 6 cylinder Ford diesel, hours unkno...

Fulghum 48" dia chipper, 3 knives, 150 hp electric drive, 5' x5' shaker screen-electric drive, ch...

Progress waste grinder, swinging hammer style, 125 hp electric drive, 1185 rpm's, unit needs to h...

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price ...

up-cut chop saw, air motor powered, includes brand new 24" dia blade, good working condition Make: Unknown

Mellott vibrating conveyor, 24" wide pan, 8" tall sides, electric drive, chipper spout, very good...

cleated belt conveyor, 24" wide x 18' long, set up for incline, electric drive, excellent condition Make: Un...

Brewer single head notcher, 15 hp electric drive motor, indexable head, good working condition Make: Brewer

Baker board deduster, up to 8" wide capacity, electric drive, price includes all new brushes, fee...

Roll case/ transfer deck, rolls are 30" wide x 38' long total length, transfer is 52" wide and 38...

roll case/ transfer deck, rollers are 30" wide x 19' long, transfer is 52" wide, electric drive, ...

Excellent condition Make: Simonds | Stock number: 15602 | Updated at: 2025-01-20 13:03:26 UTC

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working c...

Brand new skid loader attach. 2 5/16" ball hitch, chain hook, fork rating is 12,000 lbs., 6" wide...

great condition, 220/3 50/60 Make: BPR | Stock number: 21604 | Updated at: 2025-01-20 13:04:54 UTC

Good condition, 3 phase/480 volt Make: Ekstrom Carlson | Stock number: 20615 | Updated at: 2025-01-20 13:05:...

Shutte - Buffalo waste grinder, 18" wide, top feed, 3600 rpm's, includes numerous spare parts, go...

4 available, good condition Make: Southworth | Stock number: 20616 | Updated at: 2025-01-20 13:02:29 UTC

belt conveyor approx 16" wide x 15' long, 6" tall sides, electric drive, good working condition Make: Unknown

IAP dust blower, 24" dia inlet- 24" dia outlet, 150 hp electric drive, 18,000 cfm's very good con...

Log deck, 3 strands, 12' wide x 23' long, H-78 chain, electric drive, working condition Make: Unknown | Stoc...

Volvo wheel loader bucket, 2 yard capacity, good condition Make: Volvo | Stock number: 20310 | Updated at: 2...

Roll case 24" wide x 19' long, 81/2" dia rollers, hyd drive, heavy duty and in good working condi...

Fughum shaker screen/ cyclone, 7' x7' screen, 5' dia cyclone, working condition Make: Fulghum | Stock number...

Hyd reservoir approx 118 gal capacity, very good condition Make: Unknown | Stock number: 18238 | Updated at:...

Pendu slab drop belt, 24" wide x 10' 6" long, hyd drive, twin air cylinders for up-down on belt, ...

Brand New Whirlwind blowers in stock, 8" -14" inlet, good selection, all with AR-400 steel and Do...

Mellott shaker table, 16' wide x 6' long, hyd drive, excellent condition Make: Mellott | Stock number: 9186

Roll case, 24" wide x 19' long, hydraulic drive, very good condition Make: Unknown | Stock number: 9187

Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent co...

drop belt, approx 20" wide x 12' long, hyd drive, good working condition Make: Unknown | Stock number: 9171

"Hochstetler" band resaw, 12" x12" x 12' long capacity, 2" x 30" band wheels, line-shaft ready, f...

vertical edger, 2 split blades, 40 hp electric powered, good working condition Make: Helle | Stock number: 5124

36" chain type log turner, hyd drive, good working condition Make: Mellott | Stock number: 8057 | Updated at...

Cornell double arbor gang saw, 6" thick x 24" wide capacity, 2- 100 hp electric motors for arbors...

48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerou...

Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, includes hyd uni...

6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition Make: Salem

6', top wheel is 1 1/2" thick, steel slat off-bearing belt, air-strain, this unit is in good work...

7 1/2 HP. electric motor, 200 gal. vertical tank, good condition Make: Ingersoll-Rand | Stock number: 18088

30 in. dia. 15 HP. electric motor, includes mounting plate and pipe, VERY GOOD CONDITION Make: Morbark

15 HP. electric drive, 2 pumps, several electric valves, good working condition Make: Unknown | Stock number...

6"x42" wide overall, includes infeed and outfeed rollers, working condition Make: SHURMAN | Stock number: 5089

5 HP. electric motor, has cooling radiator, tank heater, good working condition Make: Unknown | Stock number...

27" 6 arm, includes lots of new parts, Good Working Condition, price includes some installation c...

rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition Make: HMC | Stock n...

Rosser head, slant track, hyd. drive on the head, in working condition, CALL FOR REBUILDING OPTIO...

rosserhead style, in working condition Make: HMC | Stock number: 6036 | Updated at: 2025-02-27 10:35:09 UTC

8'X 8' screen, electric drive, working condition, CALL FOR REBUILDING OPTIONS Make: Fulghum | Stock number: ...

8' x 8' screen, electric drive, includes the chip cyclone, good condition Make: Fulghum | Stock number: 7093

5' X 5' screen, electric drive, very good working condition Make: Fulghum | Stock number: 7085 | Updated at:...

66" dia. 6 knife, side/ rear discharge, good working condition Make: Precision Husky | Stock number: 7111

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition Make: Precision Husky | Stock number...

4 strand, 10' wide x 22' long, H-78 chain, good condition Make: Unknown | Stock number: 9249 | Updated at: 2...

48" long, bar type, good condition Make: Sering | Stock number: 8034 | Updated at: 2025-02-27 10:35:09 UTC

electric drive, various sizes, good condition prices vary from $2000 - $4000. Make: Unknown | Stock number: ...

7 strand, 12 1/2' wide x 7' long, 81X chain, electric drive , good condition Make: Unknown | Stock number: 9230

40" dia. 30 HP. electric drive, good condition Make: Morbark | Stock number: 10291 | Updated at: 2025-02-27 ...

double end trim, 22" blades, electric drive, 16' long capacity, good condition Make: Newman | Stock number: ...

double end trim saw, electric drive, good working condition Make: Unknown | Stock number: 17066 | Updated at...

Multi - head trimmer, 7 saws, 6" capacity up to 20' long, electric drive, good condition Make: Unknown

Bear Claw style, made for 18.4 x 26 tires, good condition, total of 4 Make: Unknown | Stock number: 20173

GS hyd. unit, 25 HP. electric drive, 2 pump sections, one is a pressure compensated, very good co...

Cleereman 3 head-block, 141" knees, Model;36, SN; 115, air set-works, includes 56' of track-frame...

10 Hp. electric power, 80 gal. tank, good condition Make: Unknown | Stock number: 18121 | Updated at: 2025-0...

Sullair air dryer, 500CFM, 3 phase, 460 volts, refrigerant type, excellent condition Make: Sullair | Stock n...

rosser head, slant track, working condition Make: HMC | Stock number: 6030 | Updated at: 2025-02-27 10:35:09...

Meadows 4 headblock carriage, Model; #3 DELUXE, good working condition Make: Meadows Mills | Stock number: 2072

The Wolf Model; B-1600, SN; BBH0479, includes complete run-around system and all controls, this u...

carriage track/ frame for HMC model; AC-40 carriage, good condition Make: HMC | Stock number: 2065 | Updated...

8' wide x 17' long capacity, electric drive, complete unit ready to go Make: Unknown | Stock number: 11011

5 strand, 13' wide x 18' 6" long, H78 chain, electric drive, air cylinders on pop up board stop, ...

6" capacity gang edger, gang side is 16" wide- edger side is 28" wide, this unit will be "SHOWCAS...

90" wide x 28' long, electric drive, heavy duty and in good condition Make: Unknown | Stock number: 9229

30 hp electric drive, approx 70 gal horizontal tank, good condition Make: Unknown | Stock number: 18176

chain is 11" wide , trough is 38' long, electric gear box drive, 1 set of kickers, heavy duty and...

15 hp, electric powered, vane type pump, very good condition Make: Unknown | Stock number: 18178 | Updated a...

Corley gang edger, 8" capacity, includes infeed/outfeed, electric drive, THIS UNIT NEEDS TO BE RE...

HMC Model; 1DC, AC carriage drive, complete unit ready to work Make: HMC | Stock number: 20255 | Updated at:...

ladderback chain,18" wide pan x 33' long, 12" sides, electric gear box drive, was used on incline...

Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready...

SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRIC...

operator cab, approx 5'x5', comes with BRAND NEW glass, in good condition Make: Unknown | Stock number: 20271

Beloit ring type debarker, electric drive, working condition Make: Beloit | Stock number: 6033 | Updated at:...

MDI whole log metal detector, capacity is 30" wide x 28" tall, includes controls, very good condi...

Honeyville Metal baghouse is approx. 8' x 8', 72 - 5" x 60" bags, 11" x 13" inlet, 28" x 63" bott...

Arrow Pneumatics model; B-225-2, 230 volts, 225 scfm's, working condition Make: Unknown | Stock number: 18185

5' x 6' cab, good condition Make: Unknown | Stock number: 20235 | Updated at: 2025-02-27 10:35:08 UTC

pressure comp pump, has reservoir and cooling radiator Make: Unknown | Stock number: 18184 | Updated at: 202...

Tyrone SMA-270, 125hp electric drive, includes hyd unit and cable drum, good condition Make: Tyrone-Berry

30' L, hyd drive, 24" pan, 8" sides, 19" from floor to bottom of pan, good condition Make: Mellott | Stock n...

18"W belt 22" opening 15' long 74" high, excellent condition Make: Mellott | Stock number: 20274 | Updated a...

6" x 42" capacity, MN: HE42, SN: 703-10-81, single arbor, (4) 19" saws, 2 movable blades, 8' infe...

8'x21' w/56" tall headache rack, includes misc. straps and ratchets Make: Unknown | Stock number: 20279

30 HP electric motor w/double pump direct mounter, approx. 100 gal tank, lots of electric control...

Air-Tek refrigerated air dryer, 400 CFM, 2hp, 460 volts, excellent condition Make: Airtech | Stock number: 1...

skidder tire chains, made for 18.4 x 26 tires, bear paw style, excellent condition Make: Unknown | Stock num...

36" wide x 28' long, steel slat conveyor for slabs etc., very good condition Make: Unknown | Stock number: 9237

3/4" x 8" cutter, 6' arm, hyd drive, good working condition Make: Unknown | Stock number: 20280 | Updated at...

50"x 22' overall, air cylinder log clamp down, electric drive, WR124 chain w/cleats, air cylinder...

Hydraulic tank, and 2 hydraulic pumps Make: Unknown | Stock number: 18195 | Updated at: 2025-02-27 10:35:08 UTC

4'x5' Make: Unknown | Stock number: 20278 | Updated at: 2025-02-27 10:35:08 UTC

4 strand, 33" slats on each strand, electric drive, unit is 80" tall, good condition Make: Unknown | Stock n...

75hp electric, double pilot pump, directional valve Make: Tyrone-Berry | Stock number: 18191 | Updated at: 2...

Model:36EZTD, SN: 42, 5" x 21' tailing belt outfeed, 38" x 9' infeed rolls, 6" x 36" infeed cap, ...

Syncro Shear,SN:C2521-1, balanced vibrating conveyor, electric drive, 20" pan x 47' long, 14" tal...

Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, ...

3" x 13" paddles, 16" pan, 15" sides, electric drive, 20" x 68' long, good condition Make: Unknown | Stock n...

15" ladder back chain, 24" pan, 16" sides, 32" x 53' electric drive, good condition Make: Unknown | Stock nu...

Armstrong, Model #6 RH, SN: 16154, electric drive, includes extra grinding wheels and all clamps ...

Armstrong, Model #6 RH, electric drive, no clamp or stands Make: Armstrong | Stock number: 15079 | Updated a...

60" dia, 4 Knives, top discharge, good working condition Make: Unknown | Stock number: 7119 | Updated at: 20...

Jacobson AC/DC, control box w/250A, 600 VAC 460V transformer, 125hp electric motor w/blower motor Make: Unknown

Fulghum, 18" wide x 14' long, 9" sides, good condition Make: Fulghum | Stock number: 9026 | Updated at: 2025...

26" wide x 95' long, approx 6" sides, electric drive, good condition Make: Unknown | Stock number: 9007

Model: 8X8 screen, SN: FIR-953, includes 6' cyclone w/pipe to chipper, good condition Make: Fulghum | Stock ...

Model: 450 LBD, SN: 23719L, 8" width capacity, electric drive, good condition Make: Fro-Edge | Stock number:...

150hp, 1775rpm, 4445T frame, working condition Make: Westinghouse | Stock number: 12172 | Updated at: 2025-0...

Model: VMX Series, starter for 150 hp motor, working condition Make: Westinghouse | Stock number: 20283

20" wide x 20' long, 7" sides, electric drive, working condition Make: Unknown | Stock number: 9012 | Update...

3 arm tilt hoist, arms made for 48" packs, electric drive, includes 3 strand 11'x 27'6" infeed de...

CTR de-limber, 36" chain-saw bar, good working condition Make: CTR | Stock number: 20202 | Updated at: 2025-...

3 strand transfer deck, 11'6" wide x 28' long, electric drive, H-78 chain, good condition Make: Unknown

Cleereman 4 head block , Model 40, air over air setworks, includes cab/track-frame/ carriage driv...

Hyd reservoir, approx 185 gal capacity tank, excellent condition Make: Reckart | Stock number: 18201 | Updat...

Morbark 628 debarker, electric drive, includes operator cab and all controls, very good condition Make: Morbark

Carriage drive, includes cable drum and hydraulic motor, good condition Make: Unknown | Stock number: 18200

3 strand transfer deck, 11' wide x 27'6" long, electric drive, 81X chain, good condition Make: Unknown

several sections of fiberglass vibrating conveyor sections, various sizes, call with your needs, ...

lumber carts, 42" wide x 7'-12' long, assorted styles and sizes, good condition, (price is per pi...

Fast Line scragg mill, similar to "Big Jake", twin blades 56" dia, electric drive, includes off-b...

Cornell 4" thick x 27" wide capacity, 1 stationary-1 movable blade, includes infeed, this edger i...

Honeyville bag house, includes filters, very good condition Make: Honeyville | Stock number: 10276 | Updated...

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and...

Koger-Air,14" dia inlet/outlet, electric drive, very good condition Make: Koger Air | Stock number: 10275

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition Make: Valone Kone

Progress 24" wide pan x 35' long, 9" sides, good condition Make: Progress | Stock number: 9065 | Updated at:...

Cornell style barn sweep drive, hyd drive, includes some chain, good condition Make: Cornell | Stock number:...

Mellott 24" wide pan x 50' long, 8" sides, includes sawdust section and chipper mouth, hyd drive,...

Roberts hammer mill/ waste grinder, top feed, 60 hp electric drive, 3600 rpm's, good working cond...

4" x 30" wide capacity, 2 movable blades, includes BRAND NEW ARBOR, very good condition Make: Edmiston

HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp c...

MDI metal detector, built for planer, includes all controls, LIKE NEW CONDITION! Make: MDI | Stock number: 2...

Webster 24" wide pan x 35' long, 10" sides, electric drive, good condition Make: Webster | Stock number: 9084

3 strand 10' wide X 20' long log deck, Tulsa Winch electric drive, H-78 chain, heavy duty built, ...

Pro-Cut chop saw, up-cut style, 7" x9" cutting capacity, 22" dia blade, includes 8' infeed/outfee...

Aerovent dust blower, 48" dia, 20" inlet- 18" outlet, electric drive, good condition Make: Unknown | Stock n...

3 strand 10' wide x 30' long green chain, Tulsa Winch drive, C-55 rooftop chain, heavy duty built...

Cleereman 3 head-block carriage, Silva-Tech computerized set-works, 48' long track/frame, incudes...

log trough 55' long, 12" pan width, electric drive, good working condition Make: Unknown | Stock number: 9087

40' long, 110 ladder-back chain, 14" wide, s- style drive, no power, good working condition Make: Unknown

6" x 36" capacity, 8' infeed/4' live outfeed, 1 movable & 1 stationary blade, this unit is comple...

green chain, 3 strand, 9'6" wide x 101' long, electric drive, 8X chain, very good condition Make: Unknown

5 strand green chain, 10' 6" wide x 50' long, 81X chain, electric drive, excellent condition Make: Unknown

2 strand transfer deck, 5' wide x 23' long, 81XH chain, BRAND NEW DRIVE SHAFT/ SPROCKETS, very go...

manual seal-less strapping tool for metal banding, similar to Fromm, will do banding from 1/2" up...

2 strand transfer deck, 3' wide x 25' long, electric drive, 81X chain, good condition Make: Unknown | Stock ...

Precision vibrating conveyor, 18" wide pan x 30' long, 12" tall sides, BRAND NEW fiberglass paddl...

various chipper infeed spouts for vibrating conveyors, call with your needs, $450 each Make: Unknown | Stock...

hyd unit, 10 hp electric drive, approx 160 gal tank, pressure comp pump, good working condition Make: Unknown

Operator/ sawyer cab, 4'6" wide x 13' long x 7' tall, includes air-ride seat, good condition Make: Unknown

Industries PHL log length scragg mill, 48" dia. blades, electric drive, 2 slab drop belts, all el...

Fulghum 6 knife chipper, 60" dia, top discharge, working condition Make: Fulghum | Stock number: 7138 | Upda...

Morgan chop saw, line shaft ready, 22" dia blade, includes 1 extra blade 10' infeed/5' outfeed, g...

4 strand log deck, 13' wide x 21' long, electric drive, good condition Make: Unknown | Stock number: 9107

Comact Maxi-Tour merchandising saw system, 72" dia blade, 75 hp electric drive, includes infeed/o...

log trough 36" wide over-all 19' long, electric drive, good working condition Make: Unknown | Stock number: ...

Mellott rosser-head debarker, electric drive, hyd cylinder for head up-down, recently in producti...

4 strand unscrambler, built for pallet cut-stock, adjustable length, electric drive, excellent co...

HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" di...

Morbark shaker screen for a 58" dia chipper, good working condition Make: Morbark | Stock number: 7143

Irvington-Moore 7 strand unscrambler, 75" tall, includes even-end rollers, electric drive, good w...

Tyrone Berry carriage drive, cooling radiator, no power Make: Tyrone-Berry | Stock number: 18208 | Updated a...

Jeffrey vibrating conveyor, 18" wide pan x 36' long, 6" tall sides, electric drive, good working ...

hyd unit used on Fulghum rosser-head debarker, 15 hp electric drive, 2 stage vane type pump, appr...

Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition Make: Tyr...

Tyrone Berry carriage drive, cooling radiator, working condition Make: Tyrone-Berry | Stock number: 18209

Mellott 24" wide pan x 62' long, sawdust screen section, 8" tall sides, electric drive, good work...

hyd unit, 5 hp electric drive, pressure comp pump, cooling radiator, approx 30 gal capacity tank,...

Grapple forks 73" wide overall, pin-on style, good working condition Make: Caterpillar | Stock number: 20306

2 strand transfer deck, 50" wide x 40' long, electric drive, very good condition Make: Unknown | Stock numbe...

Hyd unit, 15 hp electric motor, vane type pump, approx 80 gal capacity reservoir, good working co...

Toshiba 3 phase, 150 hp, TEFC, 890 rpm's, 505UZ frame, very good condition Make: Unknown | Stock number: 12176

Hyd power unit, 7 1/2 hp electric power, vane type pump, good condition Make: Unknown | Stock number: 18218

Hyd power unit, 7 1/2 hp electric power, enclosed pump unit, includes large control panel, approx...

hyd reservoir, approx 35 gal capacity, good condition Make: Unknown | Stock number: 18216 | Updated at: 2025...

Kaeser screw compressor, approx 15 hp, working condition Make: Unknown | Stock number: 18225 | Updated at: 2...

Ingersol-Rand Pac-Air screw compressor, 125 hp electric motor, not tested but appears good Make: Ingersoll-Rand

Hyd power unit, 15 hp electric power, vane type pump, includes 4 electric valves, approx 60 gal c...

Ingersoll-Rand screw compressor, 50 hp electric power, approx 225 CFM, good operating condition Make: Ingers...

48" dia blower, 17" inlet/ 16"outlet, 40 hp electric power, good condition Make: Unknown | Stock number: 10349

Mellott #5, 42" Log Turner (Sawmill), hyd drive, working condition Make: Mellott | Stock number: 8051 | Upda...

36" dia dust blower, 18" inlet/ 16" outlet, good condition Make: Unknown | Stock number: 10347 | Updated at:...

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital displ...

36" dia chip blower, single chip loading chute, outlet 12" x 14", good working condition Make: Unknown

Meadows 36" chain type Log Turner (Sawmill), hyd drive, working condition Make: Meadows Mills | Stock number...

2 way chip diverter, good condition Make: Unknown | Stock number: 10353 | Updated at: 2025-02-27 10:35:07 UTC

Helle cable drum unit for carriage drive, drum is 13 1/2" dia x 16" wide, hyd drive, good working...

9- head drop-saw trimmer, 24" dia blades, air cylinders on heads, electric powered, includes cont...

Supreme Mfg lumber carts, 42" wide x 92" long, heavy duty casters, 4 stake pockets, includes 2 st...

Supreme Mfg rollcase 20" wide x 20' long, 6" dia rolls, 1 7/16" dia shafts, electric drive, BRAND...

air-lock 13" inlet/outlet, gear box drive, good condition Make: Unknown | Stock number: 10355 | Updated at: ...

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, ...

waste conveyor used for chips, 18" wide paddles x 12' long, electric drive, heavy duty built and ...

concave belt conveyor, 24" wide x 30' long, electric drive, good condition Make: Unknown | Stock number: 9139

24" wide x 68' long belt conveyor, approx 6" tall sides, electric drive, good condition Make: Unknown | Stoc...

pin-on loader bucket, approx 2 1/2 yard capacity, also has fork pockets, good condition Make: Unknown | Stoc...

10"x60' waste conveyor H78 chain with paddles, electric drive ,includes new chain Make: Unknown | Stock numb...

Mellott #6 chain type 48" Log Turner (Sawmill), all hyd, working condition Make: Mellott | Stock number: 8054

roll case 24" wide x 15' long, 8" dia rolls, good working condition Make: Unknown | Stock number: 9147

belt conveyor 22" wide x 9' long, was used as off-bearing belt, working condition Make: Mellott | Stock numb...

36" bar type Log Turner (Sawmill), all hyd, good working condition Make: Unknown | Stock number: 8053 | Upda...

3 phase/230 volt Make: Cantek | Stock number: 3603 | Updated at: 2025-01-20 12:43:42 UTC

Armstrong band saw sharpener, electric drive Make: Armstrong | Stock number: 15087 | Updated at: 2025-02-27 ...

Air compressor Make: Unknown | Stock number: 18234 | Updated at: 2025-02-27 10:35:07 UTC

60 hz., 115 single phase, good condition Make: Zeks | Stock number: 18601 | Updated at: 2025-01-20 12:42:01 UTC

Cleereman 3 head-block, 36" carriage, Timber Tiger electric set-works, includes track/ drive/ 60"...

Hyd reservoir with oil cooler, approx 20 gal, good working condition Make: Meadows Mills | Stock number: 18235

Hyd unit, 10 hp electric powered, vane type pump, approc 25 gal capacity, includes several flow c...

Brewco edger, 4" thick x 20" wide capacity, powered by 2 separate electric motors, includes 16' l...

3 phase, good condition. Make: Armstrong | Stock number: 15606 | Updated at: 2025-01-20 13:00:55 UTC

Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control v...

2 strand green chain, 5' 6" wide x 32' long, gearbox drive, C-55 rooftop chain, good working cond...

200 gal vertical air tank, good condition Make: Unknown | Stock number: 20309 | Updated at: 2025-02-27 10:35...

Cornell single arbor gang saw, 4" thick x 24" wide capacity, would work well for stringers, comes...

3 phase, good condition Make: Armstrong | Stock number: 15607 | Updated at: 2025-01-20 12:55:04 UTC

Setup stand, good condition Make: Yates American | Stock number: 20613 | Updated at: 2025-01-20 12:53:30 UTC

3 phase, good condition Make: Armstrong | Stock number: 15608 | Updated at: 2025-01-20 12:52:08 UTC

3 phase, excellent condition. Make: Western Machinery Group | Stock number: 15601 | Updated at: 2025-01-20 1...

3 phase, 120V, fair condition Make: Finimat | Stock number: 15605 | Updated at: 2025-01-20 12:49:05 UTC

3 phase, 110V, will grind 24" - 30", will do alternate bevel, good condition Make: Nielson Saw & Mfg | Stock...

Hemco drop saw trimmer, 16' long capacity, includes infeed and waste conveyor, all controls inclu...

3 phase/480 volt, excellent condition Make: Baker | Stock number: 3604 | Updated at: 2025-01-20 12:39:06 UTC

3 identical scissor lifts, 3 phase and single phase, excellent condition, $7,000.00 each Make: Uni-Craft Corp

hyd drive, includes control panel, good conditon Make: Pendu Mfg | Stock number: 14063 | Updated at: 2025-02...

30' long, 12" wide ladderback chain, electric gear box drive, 1 set of log kickers, good condition Stock num...

Including all that is needed. Decks, 384 Prentice knuckle-boom, the kiln, cut-up system, splitter...

2019, 16" sq. 16' long cutting capacity, lineshaft , still in operation. Here is a good resaw . Call

< no hydraulic, no air > In working condition CALL 816- 539-7274

6 cylinder, 210 hp, 3000 hr. NPT clutch, murphy switch panel, air filters, muffler, ready to go t...

Just out of the shop with complete overhaul. 230 hp, NPT clutch , murphy switch panel, 6c 10" pul...

48" 6 knife chipper in good condition, Precision chip shaker all over good condition, but main ce...

16', 2-125 HP electric motors, Optimal outfeed with kicker. Extra motors and blades. Call

The Cornell blower is in mint condition, The chip blower with dual loading pipe is in fair condit...

2018, 24' conveyor enough room for 5 bundles, 8x8 dump bin. 5 hp. 3 ph hydraulic pump. Comes with...

25 ft. long, just out of the shop, Brand new belt, belt drive

Cat C.88 liter engine, 3525 hr. In good working Conditio. Price Dropped Call Hours: 3525